Pro duct7 - Bulk Cloned-manufacture,factory,supplier from China

     Particleboard is also called particle board or particle board. It is a kind of wood-based panel made of wood or other lignocellulosic materials and glued under heat and pressure after applying adhesive. It is also called particle board.

What are the factors that affect the price of density board?  1. The production of density board depends heavily on the stable supply of wood raw materials, so the price of wood affects the price of density board.2. Formaldehyde is one of the main ingredients for the production of density boards. The price of formaldehyde is highly correlated with the price of density boards. At the same time, the raw material for formaldehyde production is mainly methanol. Therefore, the prices of fossil energy such as oil, natural gas and coal also affect the price of density boards.3.

1. Physical and mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength and elastic modulus are good. However, because MDF is made of logs that are ground into fibers, which completely changes the structure of the wood, it has higher moisture absorption, water absorption performance, and higher thickness expansion rate, and its nail holding power is worse than that of particleboard.2.

Features of MDF:1. The internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, and the physical and mechanical properties are moderate.2. The surface is smooth and smooth, with good machinability. It can be pasted with sliced veneer or with novel and beautiful patterns.

   Particle board is also referred to as chipboard or flakeboard, it's a form of wood-primarily based panel made of timber or different lignocellulosic materials and stuck under warmth and strain after applying adhesive.

    Particleboard is a wood-based panel processed from wood or other non-wood plants. The middle layer of the particle board is wood chips, and the two sides are finely-organized wood chips, which are formed by hot pressing with adhesives and other additives. According to the structure, it can be divided into single-layer, double-layer, and gradient structure particle boards. The surface layer of the particleboard is powder layered, and the particleboard with uniform texture is the best.

Raw material of Particle board.1.Particleboard is made on the basis of scrap materials, but the range of scrap materials is relatively wide. According to different types of scrap materials, particleboard can be divided into wood particleboard, bagasse particleboard, flax chipboard, cotton stalk particleboard, Bamboo particle board, etc., cement particle board, gypsum particle board. It can be seen that most of the scraps contain wood cellulose.

Particle Board Quality Particle board is also called particle board or particle board. it's miles a form of timber-based panel product of timber or different lignocellulosic substances and stuck under warmness and stress after making use of adhesive. it's also known as chipboard.

The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000.    After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.   After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

MDF uses are as below        1. Furniture manufacturing: At present, fiberboard is mainly used to replace natural wood for furniture production. It can produce all kinds of panel combination furniture or disassembled furniture.        2. Building materials: It can also be used to make doors, wall panels and partitions, room partitions, building components such as corners, and stair railings.        3. Vehicle and ship manufacturing: It can be used in shipbuilding, vehicle inner wall panels, roof panels, partitions, etc.

Particle Board Classification:According to the use: Class A particle board; Type B particle boardAccording to the structure of particleboard, it can be divided into: single-layer particleboard; Three layer particle board; Graded structure particle board; Oriented strand board; Waffle particle board; Moulded particleboard.According to the manufacturing method, it can be divided into: flat pressed particle board; Extrude particle board.

Which is better, particleboard or density boardThe physical properties of density board and particle board are different, and there are not small differences in many aspects. When we evaluate building materials, it is difficult to determine which one is strong and which is weak. Most of the time, we need to decide which building materials to choose according to the occasion and space used. Of course, from the perspective of interior space, density board is obviously better than particle board. Why is this?The nature of the whole MDF board is the same, and its plasticity is very good.

What is particle board?  Particle board is also called chipboard or flakeboard. It is made of wood or other nitrocellulose materials. It is a wood-based board glued under the action of heat and pressure after applying an adhesive.

     Particleboard, also known as chipboard, is a wood-based panel that is made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive.

     It is said that wall panels originated in England in the 16th century. Everyone knows that the climate in England is cold and humid. In order to block the damp and cold lower part of the wall, wall panels are used for insulation.    Another theory goes back to the Netherlands in 1300. At that time, Europe was in the dark Middle Ages, and knights wearing armor and holding long swords often scratched the walls of castles or palaces inadvertently. Protect with wood.     At the beginning, wall panels were mainly used in castles and palaces.

Particle board is also called chip board or flake board. It is made of wood or other nitrocellulose materials. It is a wood-based board glued under the action of heat and pressure after applying an adhesive.

    Medium density fiberboard is a kind of artificial board made from the thinned wood of branches, small diameter wood, fast-growing wood, bamboo and other plant materials with limited wood resources. The comprehensive utilization rate of wood is high, which conforms to China's forestry development policy and is conducive to the implementation of China's forestry sustainable development strategy.Medium density fiberboard DisplayProduct Certificates-SGS,ISO9001,FSC  

      Density board is called density fiberboard. It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.     According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard.

      The Invention of Wood-based Panels     The invention of wood-based panels can be traced back to 3000 BC. At the beginning of the 1st century BC, the Romans were already familiar with veneer manufacturing technology and plywood manufacturing principles.     In 1812, the French invented the veneer sawing machine.     In 1834, France issued a planer patent.     After 1844, the improved rotary cutting machine was officially used in industrial production.

How to choose particle board1. Check the particleboard test report. Generally, products sold by regular manufacturers have test reports from relevant departments. The test report includes some important physical and mechanical performance indicators. Among them, the detection value of free formaldehyde, which is a mandatory indicator, should be as low as possible.2. Smell the smell of particleboard. Particleboard is processed from wood chips and will emit a delicate wood smell, indicating that the release of formaldehyde is less.

1.

Everyone knows that density board is widely used in making furniture or decorating partitions because of its uniform structure, fine material, stable performance and easy processing. Everyone is curious, how to distinguish the quality of density board?Let me tell you something.1. Surface cleanliness: There should be no obvious particles on the surface of the density board with good surface cleanliness. Particles are caused by impurities brought in during the pressing process, which not only affects the appearance, but also makes the paint film easy to peel off.2.

Our Services:1. All inquires will be replied with 24 hours;2. Sample charge will be REFUNDED after you placed order;3. Strictly Quality Control by Professional QC Team;4. Factory Direct Competitive Price, One Stop Service, OEM Service Offered;5. Various Designs, Sizes & Colors are available;6. Selected High Quality Raw Material, Aesthetic appearance, High-End finishes;7. We can supplied EXW,FOB,CIF,DDU shipping terms;8.

Why choose Xinhua Wood MDF boards?1. Competitive price.